XLC 310/410-T PN 16/25

The CSA model XLC 310/410-T automatic control valve reduces and stabilizes the downstream pressure following a curve edited and created according to the flow rate variations, regardless of changes and fluctuations of upstream pressure conditions, through signals supplied by a CSA controller or existing PLC either using a web interface or battery operated. The CSA pressure reducing stabilizing valve XLC 310/410-T stands out as the ideal solution for pressure management, and water loss reduction, as it can be interfaced with any existing SCADA and remote control system in addition to pressure sensors installed at the critical nodes and supply inlets of the system.

Product features
• Body and cover in ductile cast iron GJS 450-10.
• Internals in ductile cast iron GJS 450-10 and stainless steel.
• Position indicator in stainless steel.
• Circuitry in stainless steel.
• Unit flow regulator device, needle valves and flow stabilizers in stainless steel.
• Seat in stainless steel.
• Painting with fluidized bed technology RAL 5005.

Applications
• Downstream pressure regulation according to the demand.
• Water loss reduction through flow modulation at the valve’s location, or through communication with critical point.
• Reduction of leakage and operating costs of the water distribution system through a smart water network management.
• Operated by intuitive and powerful CSA controller and web interface seamlessy integrated with any existing SCADA and remote control system.

Standard and connections
• Design and testing according to EN 1074.
• Flanges size from DN 50 to DN 400 mm, higher on request.
• Flanges standard EN 1092/2, different on request.

Working conditions
• Pressure range: 10-16-25 bar.
• Minimum working pressure: 0.7 bar acting on the pilot.
• Treated water maximum 70°C, higher temperature on request.