Italica 353

Step by step solenoid control needle valve

The CSA Model Italica 353 is a needle pattern hydraulically operated automatic control valve that modulates in response to signals applied to the solenoids valves. Thanks to CSA needle valves located on the circuit the reaction time of the opening and closing can be adjusted, independently one from the other, to ensure a smooth and accurate regulation. A manual emergency circuit is usually supplied with valve in case of power failure. Normally equipped with 4-20 mA position transmitter and made in ductile cast iron with FBT (fluid bed technology) epoxy coating and stainless steel, the valve reduces head loss, throttling noise and cavitation damage.
Product features • Entirely made in ductile cast iron • FBT epoxy coating • Stainless steel parts		Working conditions • Minimum operating pressure: 0,7 bar. • Maximum operating pressure: 25 bar. • Treated water maximum temperature: 70°C.
Connections • Flanges size from DN 50 to DN 600 mm • Flanges standard EN 1092/2, different on request.		Solenoid electrical data • Voltages: 24 V DC, 24 V/50 Hz, 230 V/50 Hz. Other voltages on request. • Power consumption: inrush AC (VA) 24, hold AC (VA) 17 (8 W), DC hot/cold coil 8/9 W.